Cart 0

APC Rack PDU 2G

€707.50

Product Description

APC Switched Rack Power Distribution Units (PDUs) enable advanced,user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring,a temperature/humidity sensor port,locking IEC receptacles,and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access,configure,and control Switched Rack PDUs through secure Web,SNMP,or Telnet Interfaces.

Product Features

  • Network Management
  • Full-featured network management interfaces that provide standards-based management via Web,SNMP,and Telnet. Allows users to access,configure,and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
  • Remote individual outlet control
  • Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
  • Power delays
  • Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up,which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
  • Load indicator LED
  • Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.
  • Integrates with InfraStruXure Central
  • An IT-ready,scalable monitoring system that collects,organizes,and distributes critical alerts,surveillance video and key information,providing a unified view of complex physical infrastructure environments from anywhere on the network.
  • Single input power source
  • Supply power from one branch whip to multiple pieces of equipment,conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.
General
Device Type Power distribution strip - rack-mountable
Colour Black
Power Device
Input Voltage AC 200/208/230 V
Input Voltage Range AC 100 - 240 V
Frequency Required 50/60 Hz
Input Connectors Power IEC 60309 16A
Power Output Connectors Details 18 x power IEC 60320 C13
2 x power IEC 60320 C19
Output Voltage AC 230 V
Max Electric Current 16 A
Networking
Remote Management Interface RS-232
Remote Management Protocol SNMP,Telnet,HTTP
Expansion / Connectivity
Interfaces 1 x management (RS-232)
Miscellaneous
Cables Included 1 x serial cable
1 x power cable - 3 m
Features LED indicators,firmware upgradable
Compliant Standards VDE,IEC 60950,CSA 22.2 No. 60950,RoHS,UL 60950-1,REACH
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Environmental Parameters
Min Operating Temperature 5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 5 - 95%
Dimensions & Weight
Width 5.6 cm
Depth 4.4 cm
Height 90.2 cm
Weight 2.9 kg
Dimensions & Weight (Shipping)
Shipping Width 16.2 cm
Shipping Depth 10.7 cm
Shipping Height 112 cm
Shipping Weight 4.9 kg
Compatibility Information
Designed For P/N:AR3100,AR3150


More from this collection