Cart 0
Cisco Catalyst 2960X-24TD-L

Cisco Catalyst 2960X-24TD-L


Product Description

Cisco Catalyst 2960-X series switch is the next generation of the world's most widely deployed access switches. It enables intelligent services such as application visibility;smart operations layer 3 routing and deliver best-in-class energy efficiency with up to 80 percent energy savings.

Product Features

  • Scalable
  • The Cisco Catalyst 2960-X series switch is scalable and resilient. With Cisco FlexStack-Plus stacking,which allows stacking of up to 8 switches and delivers 80 Gbps of stacking bandwidth,the Cisco Catalyst 2960-X enables ease of operation and management with a single configuration across the members of the stack. The Cisco Catalyst 2960-X series is resilient,with control plane redundancy across FlexStack-Plus switches. This minimizes traffic disruption if any stack member fails.
  • Smart
  • The Cisco Catalyst 2960-X series enable intelligent access services,application visibility and control,and best-in-class energy management. Build for application visibility and control,these switches support NetFlow-Lite,which can be used to monitor,capture,and record traffic flows through the network. With industry-leading energy management capabilities such as Cisco EnergyWise to measure and control power usage,Energy Efficient Ethernet (EEE) and Switch and Downlink Hibernation modes to conserve power during periods of inactivity in the network,the Cisco Catalyst 2960-X with up to 80 percent energy savings is the greenest switch in the industry.
  • Simple
  • Cisco Catalyst 2960-X series switch is simple to deploy,manages,and troubleshoots. As part of the Cisco Unified Access portfolio,the Cisco Catalyst 2960-X series switch is fully integrated with Cisco Prime to offer simple operation from a central location. It can also be managed by Cisco Network Assistant,which features an intuitive GUI where users can easily apply common services across Cisco switches and routers.
Device Type Switch - 24 ports - Managed - stackable
Enclosure Type Desktop,rack-mountable 1U
Subtype Gigabit Ethernet
Ports 24 x 10/100/1000 + 2 x SFP+
Performance Switching capacity:216 Gbps
Forwarding performance (64-byte packet size):95.2 Mpps
Capacity Active VLANs:1023
Jumbo Frame Support 9216 bytes
Max Units In A Stack 8
Remote Management Protocol SNMP 1,RMON 1,RMON 2,Telnet,SNMP 3,SNMP 2c,HTTP,TFTP,SSH,CLI
Authentication Method Kerberos,Secure Shell (SSH),RADIUS,TACACS+
Features Full duplex capability,auto-negotiation,BOOTP support,ARP support,VLAN support,auto-uplink (auto MDI/MDI-X),IGMP snooping,Syslog support,DiffServ support,Broadcast Storm Control,IPv6 support,Multicast Storm Control,Unicast Storm Control,Spanning Tree Protocol (STP) support,Rapid Spanning Tree Protocol (RSTP) support,Multiple Spanning Tree Protocol (MSTP) support,DHCP snooping,Dynamic Trunking Protocol (DTP) support,Port Aggregation Protocol (PAgP) support,Trivial File Transfer Protocol (TFTP) support,Access Control List (ACL) support,Quality of Service (QoS),MLD snooping,Dynamic ARP Inspection (DAI),Cisco EnergyWise technology,Unicast Reverse Path Forwarding (URPF),Uni-Directional Link Detection (UDLD),Rapid Per-VLAN Spanning Tree Plus (PVRST+),Shaped Round Robin (SRR),LLDP support,DHCP relay,Link Aggregation Control Protocol (LACP),MAC Address Notification,Remote Switch Port Analyzer (RSPAN),Hot Standby Router Protocol (HSRP) support,Energy Efficient Ethernet,Management Information Base (MIB),Multicast VLAN Registration (MVR),Strict Priority Queuing (SPQ),Class of Service (CoS),Cisco FlexStack Plus,DiffServ Code Point (DSCP) support
Compliant Standards IEEE 802.3,IEEE 802.3u,IEEE 802.3z,IEEE 802.1D,IEEE 802.1Q,IEEE 802.3ab,IEEE 802.1p,IEEE 802.3x,IEEE 802.3ad (LACP),IEEE 802.1w,IEEE 802.1x,IEEE 802.3ae,IEEE 802.1s,IEEE 802.3ah,IEEE 802.1ab (LLDP),IEEE 802.3az,IEEE 802.1AX
Processor 1 APM86392:600 MHz
RAM 512 MB
Flash Memory 128 MB
Status Indicators Link activity,port transmission speed,port duplex mode,system,status,RPS (Redundant Power Supply)
Expansion / Connectivity
Interfaces 24 x 1000Base-T - RJ-45
1 x console - RJ-45 - management
1 x mini-USB - Type B - management
1 x USB - Type A
1 x management (Gigabit LAN) - RJ-45
2 x - SFP+ - uplink
Expansion Slots 1 (total) / 1 (free) x Stacking Module
Power Device Internal power supply
Power Redundancy Optional
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 24.9 Watt
Features Redundant Power System (RPS) connector
MTBF 569,520 hours
Compliant Standards CISPR 22 Class A,BSMI CNS 13438 Class A,CISPR 24,EN 61000-3-2,EN 61000-3-3,EN55024,EN55022 Class A,AS/NZS 60950-1,ICES-003 Class A,RoHS,FCC CFR47 Part 15,UL 60950-1 Second Edition,CSA C22.2 No. 60950-1 Second Edition,EN 60950-1 Second Edition,IEC 60950-1 Second Edition,VCCI Class A,KN24,KN22 Class A,EN 300386,RoHS 2011/65/EU
Software / System Requirements
Software Included Cisco IOS LAN Base
Dimensions & Weight
Width 44.5 cm
Depth 27.9 cm
Height 4.5 cm
Weight 4 kg
Manufacturer Warranty
Service & Support Limited warranty - replacement - lifetime - response time:next business day
Technical support - consulting - 90 days
Environmental Parameters
Min Operating Temperature -5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Humidity Range Storage 10 - 95% (non-condensing)

More from this collection